EM78P153单片机

EM78P153

General Description


EM78P153S is an 8-bit microprocessor with low-power and high-speed CMOS technology. It is equipped with a 1024 x 13-bits Electrical One Time Programmable Read Only Memory (OTP-ROM) within it. It provides a PROTECTION bit to prevent intrusion of userˇs code in the OTP memory as well as 15 OPTION bits to match userˇs requirements. With its OTP-ROM feature, the EM78P153S offers users a convenient way of developing and verifying their programs. Moreover, user developed code can be easily programmed with the ELAN writer. 



Features 14-lead packages : EM78P153S Operating voltage range : 2.3V~5.5V Available in temperature range: 0C~70C Operating frequency range (base on 2 clocks):

* Crystal mode: DC~20MHz at 5V, DC~8MHz at 3V, DC~4MHz at 2.3V.

* ERC mode: DC~4MHz at 5V, DC~4MHz at 3V, DC~4MHz at 2.3V. Low power consumption:

* less then 1.5 mA at 5V/4MHz

* typical of 15 μA, at 3V/32KHz

* typical of 1μA, during the sleep mode 1024 x 13 bits on chip ROM Built-in calibrated IRC oscillators (8MHz, 4MHz, 1MHz, 455KHz ) Programmable prescaler of oscillator set-up time One security register to prevent the code in the OTP memory from intruding One configuration register to match the userˇs requirements 32⊙ 8 bits on chip registers (SRAM, general purpose register) 2 bi-directional I/O ports 5 level stacks for subroutine nesting 8-bit real time clock/counter (TCC) with selective ** sources and trigger edges, and with overflow interrupt Power down mode (SLEEP mode) Three available interruptions

* TCC overflow interrupt

* Input-port status changed interrupt (wake up from the sleep mode)

* External interrupt Programmable free running watchdog timer 7 programmable pull-high I/O pins 7 programmable open-drain I/O pins 6 programmable pull-down I/O pins Two clocks per instruction cycle Package type: 14 pins SOP, DIP

* 14 pin DIP 300mil: EM78P153SP

* 14 pin SOP 150mil: EM78P153SN The transient point of system frequency between HXT and LXT is around 400KHz.